XANSYS Message: 95490 [Go back to message list]
No rating yet
Subject: Shell with surface offset and varying thickness - 4 node
Author: Gil, Cyprian
Date: 2008-10-16 07:53:56Hello,
Do you know if there is available shell with 4nodes with offset option
and different thickness in each node.
Element 181 can do it but not at the same time
Element 91 can do it in the same time but has 8 nodes.
Best regards
Vennlig hilsen/Kind regards
Cyprian Gil
Structural Engineer / Analysis expert
Luramyrv. 25B, P.O. Box 1137
N-4313 Sandnes, Norway
T: +47 51 63 88 55 F: +47 56 31 60 01
WWW.AGR.NO
________________________________
The information contained in this message may be CONFIDENTIAL and is
intended for the addressee only. Any unauthorised use, dissemination of
the information or copying of this message is prohibited. If you are not
the addressee, please notify the sender immediately by return e-mail and
delete this message. Thank you.