XANSYS Message: 95474 [Go back to message list]
No rating yet
Rate item:

Subject: Re: Meshing Problem - Mr. Metrisin
Author: schellapa42_at_tntech.edu
Date: 2008-10-15 20:36:22

Dear Metrisin,

I am trying to simulate a response i got in an experiment. The block model with 2 coating layer with different material properties showed deformation after 2000 cycles of thermal cyclic loading. Could you please tell me how i can do this??

Regards,
Samgopiraj Yadav,

MS - Mechanical Engineering,
Tennessee Technological University
Cookeville.
Email: schellapa42_at_tntech.edu


---- Original message ----
>Date: Wed, 15 Oct 2008 15:33:49 -0400
>From: "Metrisin, Joe"
>Subject: Re: [Xansys] Meshing Problem - Mr. Metrisin
>To: ANSYS User Discussion List
>
>Samgopiraj,
>
>I really don't know what you're trying to accomplish with the ANSYS
>model. If you comment out the SOLVE commands and run through the code
>you provided, you get the time/temperature cycle below. You have to
>decide if that is what you want or not.
>
>>From what I can tell, you have a repeatable cycle there. There is no
>point in running the FEA analysis through more than one repeatable
>cycle. You're just going to get the same temperatures over and over.
>
>Joe Metrisin
>Florida Turbine Technologies, Inc.
>
>
> ***** ANSYS - ENGINEERING ANALYSIS SYSTEM RELEASE 11.0SP1 *****
> ANSYS Structural U
> 00313842 VERSION=INTEL NT 15:22:09 OCT 15, 2008 CP=
>3.172
>
>
> REFERENCE TEMPERATURE= 24.000 (TUNIF= 24.000)
>
> *DO LOOP ON PARAMETER= I FROM 1.0000 TO 20.000 BY 1.0000
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 21.000
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 70.000
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 80.000
>
> *ENDDO INDEX= I
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 91.000
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 140.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 150.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 161.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 210.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 220.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 231.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 280.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 290.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 301.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 350.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 360.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 371.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 420.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 430.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 441.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 490.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 500.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 511.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 560.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 570.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 581.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 630.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 640.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 651.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 700.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 710.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 721.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 770.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 780.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 791.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 840.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 850.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 861.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 910.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 920.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 931.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 980.00
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 990.00
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1001.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1050.0
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 1060.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1071.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1120.0
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 1130.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1141.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1190.0
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 1200.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1211.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1260.0
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 1270.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1281.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1330.0
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 1340.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1351.0
>
> UNIFORM TEMPERATURE SET TO 700.000000
>
> TIME= 1400.0
>
> UNIFORM TEMPERATURE SET TO 24.0000000
>
> TIME= 1410.0
>
>
>Joseph T Metrisin
>Florida Turbine Technologies, Inc.
>1701 Military Trail, Suite 110
>Jupiter, FL. 33458-7887
>(561) 427-6346
>
>
>
>^----------------------------------------------------
>| XANSYS web - www.xansys.org |
>| XANSYS blog - xansys.blogspot.com |
>| The Online Community for users |
>| of ANSYS, Inc. Software |
>| Hosted by PADT - www.padtinc.com |
>^----------------------------------------------------
Posts possibly associated with message #95474AuthorDateScore
95357Meshing Problem - Mr. Metrisinschellapa42_at_tntech.edu2008/10/06 
95359Re: Meshing Problem - Mr. MetrisinJoe Metrisin2008/10/06 
95360Re: Meshing Problem - Mr. Metrisinschellapa42_at_tntech.edu2008/10/06 
95465Re: Meshing Problem - Mr. Metrisinschellapa42_at_tntech.edu2008/10/15 
95469Re: Meshing Problem - Mr. MetrisinJoe Metrisin2008/10/15 
95474Re: Meshing Problem - Mr. Metrisinschellapa42_at_tntech.edu2008/10/15 
95479Re: Meshing Problem - Mr. MetrisinDan Bohlen2008/10/15 
95486Re: Meshing Problem - Mr. Metrisinschellapa42_at_tntech.edu2008/10/1510
95491Re: Meshing Problem - Mr. MetrisinJoe Metrisin2008/10/160