XANSYS Message: 95450 [Go back to message list]
No rating yet
Rate item:

Subject: Re: *moper
Author: Bashyam, Navaneeth (CSI)
Date: 2008-10-15 12:27:37


Samer,

*MOPER, ParR, Par1, Oper, Par2, Par3, kDim, --, kOut, LIMIT

First of all, you mentioned about two different meshes, are the
underlying geometries the same ?

/nerr command will only stop reporting the errors/warnings. But the root
cause of
*Moper reporting the error/warning means there is a difference in the
geometry you are using with in the ANSYS default tolerance.

#0. See if there is undocumented command to modify the tolerance, I know
the BFINT command has a way to modify default tolerance.
#1. Modify your Par1 array, you could scale it down (little bit) so that
the Par2 defines equal to or bigger domain than Par1. This is an
indirect way of addressing the tolerance issue.
#2. If you do not want to do the #1 #2, then kout=1 should help. It will
leave out the nodes which do not lie with in the tolerance limit.
#3. /nerr,1e12,1e12 will only help the least in my view.

Hope that helps.


Thanks,
Navaneeth



Navaneeth Bashyam
Senior Product Developer
Closure Systems International
Office: 765 364 7358
Fax : 765 364 5678
navaneeth.bashyam_at_csiclosures.com
The Mind once stretched by an idea, never regains its original
dimensions.





-----Original Message-----
From: xansys-bounces_at_xansys.org [mailto:xansys-bounces_at_xansys.org] On
Behalf Of MAHMOUD Samer H (AREVA NP INC)
Sent: Tuesday, October 14, 2008 1:24 PM
To: xansys_at_xansys.org
Subject: [Xansys] *moper

Dear ANSYS users,
I am using the *moper map to map stresses between two meshes. I get
many warning messages that say some of the interpolation points are
located outside the region and the closest values will be used. I used
/NERR,,,-2 . This allowed the analysis to continue and run and the
error messages are written to the error file only. Is there away to
suppress error generation completely. My analysis is taken longer than
I expected and most of the time is spent during the mapping operation
where most of the warning messages are produced.

Samer Mahmoud
AREVA NP INC.
^----------------------------------------------------
| XANSYS web - www.xansys.org |
| XANSYS blog - xansys.blogspot.com |
| The Online Community for users |
| of ANSYS, Inc. Software |
| Hosted by PADT - www.padtinc.com |
^----------------------------------------------------
Posts possibly associated with message #95450AuthorDateScore
25781*MOPER with beta MAP function...Mike McNamee2001/07/10 
25782Re: *MOPER with beta MAP function...John Swanson2001/07/10 
25783Re: *MOPER with beta MAP function...Mike McNamee2001/07/10 
25793Re: *MOPER with beta MAP function...Gordon May2001/07/11 
25802Re: *MOPER with beta MAP function...John Swanson2001/07/11 
25806Re: *MOPER with beta MAP function...Gordon May2001/07/11 
25822Re: *MOPER with beta MAP function...Mike McNamee2001/07/11 
25823Re: *MOPER with beta MAP function...John Swanson2001/07/11 
25830Re: *MOPER with beta MAP function...Mike McNamee2001/07/11 
26579MAP operation on *MOPER CommandJohn Swanson2001/07/31 
26627Re: MAP operation on *MOPER CommandMike McNamee2001/08/01 
26687Re: MAP operation on *MOPER CommandJohn Swanson2001/08/02 
28394APDL: *moper,,,,,mapRick Fischer2001/09/11 
28396Re: APDL: *moper,,,,,mapMike McNamee2001/09/11 
28397Re: APDL: *moper,,,,,mapRick Fischer2001/09/11 
28401Re: APDL: *moper,,,,,mapMike McNamee2001/09/11 
28418Re: APDL: *moper,,,,,mapRick Fischer2001/09/12 
28423Re: APDL: *moper,,,,,mapRick Fischer2001/09/12 
28425Re: APDL: *moper,,,,,mapRick Fischer2001/09/12 
29098*MOPER What is wrong in this approachGuus Janssen2001/09/28 
29100*MOPER What is wrong in this approachGuus Janssen2001/09/28 
29102Re: *MOPER What is wrong in this approachJohn Swanson2001/09/28 
34227*MOPER with MAPChristian Semler2002/02/21 
34228Re: *MOPER with MAPRick Fischer2002/02/21 
34231Re: *MOPER with MAPParis Altidis2002/02/21 
34232Re: *MOPER with MAPAntonio L. Negron2002/02/21 
34234Re: *MOPER with MAPChristian Semler2002/02/21 
35983*MOPER, MAP option : interpolation method ?Sebastien Marque2002/04/10 
35997*MOPER, with MAP optionsmarqueansys sebastien.marque@2002/04/10 
36012Re: *MOPER, MAP option : interpolation method ?John Swanson2002/04/10 
36415[input file]BCs mapping using *moperSung-Chul Lee2002/04/19 
43440Pressure mapping using *Moper for rectangular pontoon hullXiaoping Yang2002/11/12 
43455Re: Pressure mapping using *Moper for rectangular pontoon hullRick Fischer2002/11/1310
48351[general] MOPER documentationDaniel Kellman2003/03/26 
48352Re: [general] MOPER documentationRoberto Porto2003/03/26 
48353Re: [general] MOPER documentationRick Fischer2003/03/26 
48354Re: [general] MOPER documentationDaniel Kellman2003/03/26 
48355Re: [general] MOPER documentationMartin Liddle2003/03/26 
48356Re: [general] MOPER documentationRick Fischer2003/03/26 
64240Ansys 8.0 *MOPER ErrorTom Wall2003/11/11 
64241Re: Ansys 8.0 *MOPER ErrorPage Strohl2003/11/11 
64242Re: Ansys 8.0 *MOPER ErrorPage Strohl2003/11/11 
64244Re: Ansys 8.0 *MOPER ErrorTom Wall2003/11/11-10
67014[GEN] *MOPER Command QuestionRicardo Moraes2004/02/19 
70338*Moper commandPage Strohl2004/06/16 
70344Re: *Moper commandFrank Exius2004/06/17 
79640*MOPER sort trouble...Jim Patterson2005/11/11 
79641Re: *MOPER sort trouble...Matt Sutton2005/11/11 
84575Funny error with *MOPER MAP operationWong Chee How 2006/10/05 
85587APDL-*MOPER,,,MAPCOLOMBET David NEERFT (AREVA NP SAS) 2006/12/0510
85593Re: APDL-*MOPER,,,MAPRicardo Moraes2006/12/05 
95447*moperSamer Mahmoud2008/10/14 
95450Re: *moperBashyam, Navaneeth (CSI) 2008/10/15 
95451Re: *moperDan Bohlen2008/10/15 
95462Re: *moperSamer Mahmoud2008/10/15 
95468Re: *moperFernand Thomassy2008/10/15 
95481Re: *moperSamer Mahmoud2008/10/15 
95485Re: *moperFernand Thomassy2008/10/15 
95492Re: *moperSamer Mahmoud2008/10/165