XANSYS Message: 93145 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: amplitude for harmonic solution
Author: Riccardo Testi
Date: 2008-05-05 15:11:58

Erik,
you might resort to the LCDEF, LCOPER and LCASE commands.
That way you can transfer your results into load cases, combine them
and finally load the combined data into the database to postprocess
them in /POST1.


Best regards
---
Riccardo Testi
POWERTRAIN and ENGINEERING
ENGINE DESIGN and CALCULATIONS
Piaggio & C. S.p.A
Viale Rinaldo Piaggio, 25
56025 Pontedera (Pisa) - ITALY
' Phone: +39 0587 272324
7 Fax: +39 0587 272010
* E-mail: riccardo.testi_at_piaggio.com




At 16.27 05/05/2008, you wrote:
>Hello,
>
>is there a possibility or a trick to display the amplitude of the
>displacement for a harmonic solution in /post1 ? As far as I know you
>just have the real and the imaginary part in /post1 for each frequency
>step and you can have a look at the amplitude of single nodes in
>/post26. I would like to have a picture of the displacement of the whole
>structure and not just curves for some points.
>
>I'm working with ANSYS 11.0.
>
>Thanks for any help,
>Erik
>
>--
>Otto-von-Guericke-University Magdeburg
>Institute of Micro and Sensor Systems (IMOS)
>Dipl.-Ing. Erik Ansorge
>P.O. Box 4120
>39016 Magdeburg
>Germany
>
>Tel: +49-391-67-12718
>Fax: +49-391-67-12609
>erik.ansorge_at_e-technik.uni-magdeburg.de
>
>^--------------------------------------------------------
>| XANSYS - www.xansys.org |
>| The Discussion List for users of ANSYS, Inc. Software |
>| Hosted by PADT - www.padtinc.com |
>^--------------------------------------------------------
Posts possibly associated with message #93145AuthorDateScore
93143amplitude for harmonic solutionErik Ansorge 2008/05/05 
93145Re: amplitude for harmonic solutionRiccardo Testi2008/05/05 
93146Re: amplitude for harmonic solutionRiccardo Testi2008/05/05 
93148Re: amplitude for harmonic solutionTed Harris2008/05/05 
93153Re: amplitude for harmonic solutionRam Balasubramanian2008/05/05