XANSYS Message: 93143 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: amplitude for harmonic solution
Author: Erik Ansorge
Date: 2008-05-05 14:27:06

Hello,

is there a possibility or a trick to display the amplitude of the
displacement for a harmonic solution in /post1 ? As far as I know you
just have the real and the imaginary part in /post1 for each frequency
step and you can have a look at the amplitude of single nodes in
/post26. I would like to have a picture of the displacement of the whole
structure and not just curves for some points.

I'm working with ANSYS 11.0.

Thanks for any help,
Erik

--
Otto-von-Guericke-University Magdeburg
Institute of Micro and Sensor Systems (IMOS)
Dipl.-Ing. Erik Ansorge
P.O. Box 4120
39016 Magdeburg
Germany

Tel: +49-391-67-12718
Fax: +49-391-67-12609
erik.ansorge_at_e-technik.uni-magdeburg.de

^--------------------------------------------------------
| XANSYS - www.xansys.org |
| The Discussion List for users of ANSYS, Inc. Software |
| Hosted by PADT - www.padtinc.com |
^--------------------------------------------------------

Posts possibly associated with message #93143AuthorDateScore
93143amplitude for harmonic solutionErik Ansorge 2008/05/05 
93145Re: amplitude for harmonic solutionRiccardo Testi2008/05/05 
93146Re: amplitude for harmonic solutionRiccardo Testi2008/05/05 
93148Re: amplitude for harmonic solutionTed Harris2008/05/05 
93153Re: amplitude for harmonic solutionRam Balasubramanian2008/05/05