XANSYS Message: 93075 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: [WB] FSCALE does not work
Author: =?ISO-8859-1?Q?Arne_L=F6hn?=
Date: 2008-04-28 15:49:55

Metrisin, Joe schrieb:
> Arne,
>
> I don't think SFSCALE will work with tabular loads either, so you'll have to do the *VOPER or *TOPER after all.

You are right - it isn't that easy, although I don't know why Ansys
chose this way:

Normal forces are ordered in tables (table parameters --> *TOPER), since
they are constant for all nodes of the node components.

The SFSCALE worked for bearing forces only, which were transformed to
pressures, which have a sinusoidal form in the cylindrical face.

But, now I know how things go - thanks again for you help.

Best regards.

Arne


--
IDASWIND GmbH
Oranienstra
Posts possibly associated with message #93075AuthorDateScore
93060[WB] FSCALE does not work for tabular boundary conditionsArne Löhn2008/04/28 
93061Re: [WB] FSCALE does not work for tabular boundaryJoe Metrisin2008/04/28 
93062Re: [WB] FSCALE does not work for tabular boundaryJoe Metrisin2008/04/28 
93066Re: [WB] FSCALE does not work for tabular=?ISO-8859-1?Q?Arne_L=F6hn?= 2008/04/28 
93072Re: [WB] FSCALE does not work forJoe Metrisin2008/04/28 
93073Re: [WB] FSCALE does not work forJoe Metrisin2008/04/28 
93075Re: [WB] FSCALE does not work=?ISO-8859-1?Q?Arne_L=F6hn?= 2008/04/28