I am also using ANSYS 6.0

As Manfred also experienced the same problem with 6.0, probably ANSYS Tech
Support can suggest if this is some Class 3 error and what’s the fix.

However I’ll be extremely thankful to anyone from User Community who can
suggest a way-out.

Thanks,

Pankaj Chadha
Turbine Design
Siemens Ltd.
New Delhi, India.

-----Original Message-----
From: Manfred Spraul [mailto:manfred_at_colorfullife.com]
Sent: Monday, January 19, 2004 12:10 PM
To: ANSYS User Discussion List
Subject: Re: [Xansys] Result file too big ?? -- additional info...

Chadha Pankaj wrote:

>Referring to Pt No 2 below, the rst file which couldn’t be read in /post26
>on HP, I could read on Intel machine!
>However, my current worry is how to read the 8GB file in /post1 on intel .
>
>---- original message----
>
>Hi Everybody !
>
>1 I have an 8GB results file for a transient anslysis on INtel platform
>with 2GB Ram. When I ask for Results Summary or Read Results, I get a
>message NO RESULT SETS ON THE RESULT FILE. The mntr file shows proper
>solution summary. Output controls were outres,nsol,all and outres,strs,all.

>
>
Which ANSYS version? I had a similar problem with 6.0 (or 6.1?), it
worked with 7.0. I didn’t try to read the old result file with the newer
ansys version - you might have to rerun your analysis.

--    Manfred