XANSYS Message: 63 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: How to mesh --- Please help!
Author: Clement Tham
Date: 1998-12-17 02:29:00

Hi,

Im trying to mesh a hollow cylinder , with the outer radius is 203 mm and
thickness 7.1 mm, the length of the column is 4010 mm. I managed to model
the column using Ansys build-in modelling tools (hollow cylinder), but when
I tried to mesh it (after selecting the solid92 element and entering the
material properties), it hangs most of the time. Then, I try to set the
mesh to coarser (Im using smart meshing tool), and finally Ansys managed to
mesh the cylinder but with huge number of elements and nodes! (more than
100,000).

So, the question is what should i do to reduce the elemnet size? I tried to
set the element size coarser by using the global size but still can't mesh
it properly.

Thanks in advance.

Rgds,
Clement Tham

Posts possibly associated with message #63AuthorDateScore
63How to mesh --- Please help!Clement Tham1998/12/17 
64Re: How to mesh --- Please help!Marc Seidel1998/12/17 
66Re: How to mesh --- Please help!David Gross1998/12/17 
67Re: How to mesh --- Please help!Xiao Gong1998/12/17 
68Re: How to mesh --- Please help!Tom Davis1998/12/17 
69Re: How to mesh --- Please help!Steve Owen1998/12/17 
70Re: How to mesh --- Please help!Paris Altidis1998/12/17 
74Re: How to mesh --- Please help!Peter Budgell1998/12/17 
77Re: How to mesh --- Please help!Viktor Doundakov1998/12/17 
78Re: How to mesh --- Please help!Jan Christian Anker1998/12/17 
89Re: How to mesh --- Please help!Dan Bohlen1998/12/18 
93Re: How to mesh --- Please help!Clement Tham1998/12/21