XANSYS Message: 4247 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: *GET command, mass of axisymmetric models
Author: Ernst Hustedt
Date: 1999-08-25 22:27:00

> -----Original Message-----
> From: Hustedt, Ernst [mailto:Ernst.Hustedt@a...]
> Sent: Thursday, 26 August 1999 14:14
> To: 'xansys@o...'
> Subject: RE: [xansys] Re: *GET command, mass of axisymmetric models

> From: "Hustedt, Ernst"

> Hi,

> According to the book, axisymmetric elements are not allowed
> with the IRLF
> command.

> I would do just a simple static run with inertia load only
> and *get the
> reactions, but you would need to check for the 2*pi factor.
> From memory,
> 5.5 gives you the correct total mass.

OOPS!

that's the correct total reaction, not mass
(but numerically = mass if unit acceleration (eg 1m/s**2), of course )

> ernst h.

Posts possibly associated with message #4247AuthorDateScore
4241Re: *GET command, mass of axisymmetric modelsStan Schwantes1999/08/25 
4245Re: *GET command, mass of axisymmetric modelsErnst Hustedt1999/08/25 
4247Re: *GET command, mass of axisymmetric modelsErnst Hustedt1999/08/25 
4271Re: *GET command, mass of axisymmetric modelsFrancesco Bendinelli1999/08/26