XANSYS Message: 38716 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: Anisotropic modeling - Emag - 2d
Author: Palanivasagam Subbaraman
Date: 2002-06-12 12:01:00

Thank you. I'll try with this.

Regards,
Vasagam SP

-----Original Message-----
Sent: Wednesday, June 12, 2002 8:22 PM
To: xansys@yahoogroups.com

In article
<05C613689F01D611AC820002A54177C001982C49@G...>,
"Subbaraman, Palanivasagam (IndSys)"
writes
>I need to model an anisotropic material in 2d emag. The magnetic
>characteristics of the material is linear in one direction and non - linear
>in the other direction. Can anybody help me in simulating such a material
in
>Ansys? Is it possible to model an anisotropic material with non - linear
>magnetic characteristic in ANSYS?

Is this BH data? If so you can mix linear and non-linear material
properties. Specify a relative permeability for the linear direction
(in the element co-ordinate system) and a relative permeability of zero
in the non-linear direction together with a BH table. See section
2.3.1.6 of the Magnetic Field Guide for ANSYS 5.7.

Something like

MP,MURX,2,1000 !relative permeability of 1000 in X
MP,MURY,2,0 !Use BH curve for Y direction

Martin Liddle, Tynemouth Computer Services, 27 Garforth Close,
Cramlington, Northumberland, England, NE23 6EW.
Phone: 01670-712624. Fax: 01670-717324.
Web site: .

Posts possibly associated with message #38716AuthorDateScore
38682Anisotropic modeling - Emag - 2dPalanivasagam Subbaraman2002/06/11 
38705Re: Anisotropic modeling - Emag - 2dMartin Liddle2002/06/12 
38716Re: Anisotropic modeling - Emag - 2dPalanivasagam Subbaraman2002/06/12