XANSYS Message: 38490 [Go back to message list] [bookmark on del.icio.us]
No rating yet Subject: Re: Connecting areas with areas and volumes Author: Yaser Jaradat Date: 2002-06-04 16:52:00Mark,
My model is shell elements on a form of I or II section....and some sides are connected to springs (combin39 elements). When I solve the shells without the springs I don't get the discontinuous msgs. but when I connect the springs, the Note appears. I think it doesn't affect the solution because it is neither error not warning. It is just a note.
yaser
"Tate, Mark HS-SD" wrote:
> Yaser, > If you have tied parts of your model together with coupled nodes or > constraint equations, you may get this warning, but your model is OK. Also, > check you displacement contour plots for any obvious discontinuities across > your model. There should not be any step changes in color contours. If you > have detrimental discontinuities, this should become apparent. Animating > your displacements may also reveal unusual disconnects.
> Mark Tate > Principal Engineer > Hamilton Sundstrand - San Diego, CA > A United Technologies Company > E-mail: mark.tate@h...