XANSYS Message: 38485 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: COMBIN39 REAL CONSTANTS
Author: Dan Bohlen
Date: 2002-06-04 15:49:00

View it through the menu ....

-----Original Message-----
Sent: Tuesday, June 04, 2002 3:47 PM
To: xansys@yahoogroups.com

I am using COMBIN39 spring. I provide real constants up to 10 or 11 points but
when I view the output file
list for my input I see up to 6 values only. Does that mean that the rest were
ignored or it views only the
first 6 values and consider the rest without viewing ??

I provided this R:
R, 44, .0, .00, 1.0, 26.65, 2.0, 47.82, 3.0, 59.48, 4.0, 64.75, 5.0,
67.15, 6.0, 68.33, 7.0,
68.96,8.0,69.33, 9.0, 69.56,10.0, 69.70,

and this is what appears in the output file:

REAL CONSTANT SET 44 ITEMS 1 TO 6
0.0000 0.0000 1.0000 26.650 2.0000 47.820

Yaser

"Malametz, David" wrote:

> Dean,

> You're right. I did check the unconverged solution and couldn't find
> anything out of the ordinary. The linearity is geometric. The
> nonconvergence is that the solution diverges through 100 iterations. The
> load should be orders of magnitude below buckling.

> I suppose that I could try to select a different solver. This was supposed
> to speed the solution, but....

> Thanks for the questions. The list I follow is similar.
> David

> -----Original Message-----
>

Posts possibly associated with message #38485AuthorDateScore
38483COMBIN39 REAL CONSTANTSYaser Jaradat2002/06/04 
38484Re: COMBIN39 REAL CONSTANTSHursha Narayan2002/06/04 
38485Re: COMBIN39 REAL CONSTANTSDan Bohlen2002/06/04 
38486Re: COMBIN39 REAL CONSTANTSYaser Jaradat2002/06/04