XANSYS Message: 3799 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: How do I turn off Power Graphics at startup?
Author: Don Shaffer
Date: 1999-08-06 09:19:00

Stansak,

I have not tried it but if you setup your graphics the way you
want, all the setting can be saved by doing a graphics save
settings. this will reset the defaults to however you have your
screen setup. This may allow you to set powergaphics off
as the default.

Don Shaffer, Mechanical Engineer
Siemens Westinghouse Power Corp
Orlando, Florida

stansak.apexmail.com.SMTP.Exchange@s... wrote:

> From: stansak@a...

> You can't do it in the start file. Look at the log file
> and you'll see that Ansys sticks the graphics command in
> after the start file is read. I made a macro to
> turn in on. It seems like Ansys REALLY wants us
> to use power graphics. (one might also notice that on
> the /INP command for the start file there is a bunch
> of commas and some undocumented parameter set to 1.
> ANyone know what this does?)

> LOG file

> /BATCH
> /COM,ANSYS RELEASE 5.5.3 UP19990405 08:51:20 08/06/1999
> /input,start55,ans ,,,,,,,,,1
> /COM,ANSYS RELEASE 5.5.3 UP19990405 08:51:21 08/06/1999
> /GRA,POWER
> /GST,ON


Posts possibly associated with message #3799AuthorDateScore
3727How do I turn off Power Graphics at startup?Jim Patterson1999/08/04 
3729Re: How do I turn off Power Graphics at startup?t1-nehete_cs@1999/08/04 
3732Re: How do I turn off Power Graphics at startup?Jim Patterson1999/08/04 
3798Re: How do I turn off Power Graphics at startup?Dan Bohlen1999/08/06 
3799Re: How do I turn off Power Graphics at startup?Don Shaffer1999/08/06 
3822Re: How do I turn off Power Graphics at startup?Chris Mollo1999/08/06 
3823Re: How do I turn off Power Graphics at startup?Dean Brown1999/08/06 
3835Re: How do I turn off Power Graphics at startup?Chris Mollo1999/08/09