XANSYS Message: 3719 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: Real constant reset during glue areas.
Author: Juha Tyllinen
Date: 1999-08-04 03:08:00

> I have to copy a certain set of areas with different real constants many
> times,
> and then I have to glue these areas so that I get a continuous mesh. But
> when I
> glue those areas, all the real constants get reset to real constant nunber
> 1.
> It would be very tedious to redefine real constants for each of those
> copied
> areas again. Though I have sorted this by copying elements instead of
> areas in
> this model I would like to know whether there is any other way of avoiding
> this
> reseting of realconstant nos. when areas are glued.

This propably won't help, but NUMM,kp retains the area properties.
Unfortunately it
requires similar KP locations on area edges so more work is required for the
original
areas.

JKT

Juha Tyllinen Juha.Tyllinen@k...

HAT / Hoisting technology
KONE Elevators Research Center Tel. 358-20-475 2092
P.O. Box 677, SF-05801 HYVINKAA Fax. 358-20-475 2729
Finland

Posts possibly associated with message #3719AuthorDateScore
3717Real constant reset during glue areas.Himani Agrawal1999/08/04 
3719Re: Real constant reset during glue areas.Juha Tyllinen1999/08/04 
3723Re: Real constant reset during glue areas.Brad Lamirand1999/08/04 
3736Re: Real constant reset during glue areas.Christopher Wright1969/12/31 
3747Re: Real constant reset during glue areas.Chris Kennedy1999/08/04 
3760Re: Real constant reset during glue areas.Himani Agrawal1999/08/05 
3761Re: Real constant reset during glue areas.Himani Agrawal1999/08/05 
3770Re: Real constant reset during glue areas.Brad Lamirand1999/08/05 
3828Re: Real constant reset during glue areas.Himani Agrawal1999/08/07 
3836Re: Real constant reset during glue areas.Brad Lamirand1999/08/09 
3867Re: Real constant reset during glue areas.Himani Agrawal1999/08/10