XANSYS Message: 364 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Meshing IGES assembly
Author: Clayton Heberling
Date: 1999-01-21 17:10:00

I have an IGES assembly that consists of two volumes sharing common surfaces.
I want to have the two volumes mesh so that the mesh at the common areas match.
I have successfully brought the assembly in and ANSYS has created the areas.
ANSYS will not let me use the NUMMRG command since they were imported.
ANSYS will not let me use the ARMERGE command because the areas do not belong
to a volume and have reversed area orientation.

How do I mesh the two volumes so that the mating surfaces match?

Clayton Heberling, PE
Pressure Sciences, Inc.
Towne Centre Offices, Suite 290
1789 South Braddock Avenue
Pittsburgh, PA 15218-1868

(412)-371-3117
Fax:(412)-371-0424
Email:clayh@p...

Visit our web page at www.press-sci.com

Posts possibly associated with message #364AuthorDateScore
364Meshing IGES assemblyClayton Heberling1999/01/21 
365Re: Meshing IGES assemblyDoug Scott1999/01/21 
366Re: Meshing IGES assemblyGlen Hunt1999/01/21 
375Meshing IGES assembly -ReplyJamie Orr1999/01/22 
376Re: Meshing IGES assembly -ReplySteve Owen1999/01/22 
384Re: Meshing IGES assembly -ReplyClayton Heberling1999/01/22