XANSYS Message: 321 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: Volume Element to select
Author: Dan Bohlen
Date: 1999-01-19 13:26:00

You could try the old,undocumented ENODE command. It works in 54.

tom davis wrote:

> From: tom davis

> I think you need ESLN,S,0. If you use ESLN,S,1 you are trying to select
> only elements that have all of their nodes in the previously selected
> node set.

> TWD

> Thomas W. Davis, P.E.
> FSI International (http://www.fsi-intl.com/)
> 322 Lake Hazeltine Drive
> Mail Station 4-1035
> Chaska, MN 55318
> 612-361-7359, FAX 612-361-7393
> tom.davis@f...

> top business wrote:

> > From: "top business"

> > Hi,

> > I have some problem in selecting volume element attached to a row of
> > nodes. The command issued are

> > NSEL,ALL
> > ESEL,ALL
> > !
> > !
> > LOCAL,11,1, 0,0,0, , , ,1,1,
> > NSEL,S,LOC,X, 1.2000000E-02, 1.2000000E-02
> > ESLN,S,1

> > I'm able to select the nodes but I'm not able to select volume elements
> > attached to those node.

> > Any help would be appreciated

> > Rgds,
> > Michael

Dan Bohlen Phone: (513) 243-4645 / Dial Comm [8*332-4645]
Stress Analyst Email: dan.bohlen@a... M/D K-105
GE Aircraft Engines Fax: (513) 243-4888 or 243-4886


Posts possibly associated with message #321AuthorDateScore
312Volume Element to selecttop business top_business@1999/01/19 
313Re: Volume Element to selectTom Davis1999/01/19 
314Re: Volume Element to selectPeter Budgell1999/01/19 
315Re: Volume Element to selectRick Fischer1999/01/19 
316Re: Volume Element to selecttop business top_business@1999/01/19 
317Re: Volume Element to selectPeter Budgell1999/01/19 
321Re: Volume Element to selectDan Bohlen1999/01/19 
325Re: Volume Element to selectJerzy Cwifeld1999/01/20