XANSYS Message: 25731 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: coupled field: struc/emag
Author: Huimin Mu hmu@
Date: 2001-07-10 10:52:00

I have no problem for element, I use solid 95 for STRUC and HF120 for EMAG
since it is high frequency problem, but my problem is how to change the
coordinate of the EMAG model due to the deformation of the structural part.
Thanks,
Huimin Mu
University of Missouri-Rolla
----- Original Message -----
To:
Sent: Tuesday, July 10, 2001 9:47 AM

> for 2D : Plane 13 can be used for coupled field, since it allows for
> ux,uy, and the AZ dofs. There are examples in the guides and also in the
> verification problems.

> for 3D solid5, likewise.

> original :

> My question is, for coupled-field STRUC-EMAG analysis, I need to use
> the deformed shape from structure analysis as the input elements for
> electromagnetic analysis, how can I connect these two? Any clue will
> be appreciated, thanks in advance for any help.

> Huimin Mu
> Civil Engineering
> University of Missouri-Rolla, USA


Posts possibly associated with message #25731AuthorDateScore
25729coupled field: struc/emagMike Yaksh2001/07/10 
25731Re: coupled field: struc/emagHuimin Mu hmu@2001/07/10 
25732Re: coupled field: struc/emagSteve Groothuis2001/07/10 
25734Re: coupled field: struc/emagMartin Liddle2001/07/10 
25750Re: coupled field: struc/emagThomas Jin-Chee Liu2001/07/10 
25753Re: coupled field: struc/emagBill Bulat2001/07/10