XANSYS Message: 25720 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: inertia relief => *get => principal axes
Author: Robert Strickland bobs@
Date: 2001-07-10 07:26:00

Bill,

The following commands get the mass property information from inertia reliefe
analyses:

*GET,Par,ELEM,0,... (Available only after inertia relief solution [IRLF,1] or
pre-calculation of masses [IRLF,-1])
MTOT X,Y,Z Total mass components.
MC X,Y,Z Mass centroid components.
IOR X,Y,Z, XY,YZ,ZX Moment of inertia about origin.
IMC X,Y,Z, XY,YZ,ZX Moment of inertia about mass centroid.
FMC X,Y,Z Force components at mass centroid.
MMOR X,Y,Z Moment components at origin.
MMMC X,Y,Z Moment components at mass centroid.

EXAMPLES:

*get,tmas,elem,0,mtot,x
*get, zcg,elem,0, mc,z
*get, ixx,elem,0, ior,x
*get, iyy,elem,0, ior,y
*get, izz,elem,0, ior,z
*get, ixy,elem,0, ior,xy

Bob Strickland
Elliott Company
Jeannette, PA

Posts possibly associated with message #25720AuthorDateScore
25712inertia relief => *get => principal axesBill Bulat2001/07/09 
25720Re: inertia relief => *get => principal axesRobert Strickland bobs@2001/07/10 
25754Re: inertia relief => *get => principal axesBill Bulat2001/07/10