XANSYS Message: 22618 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: Bending Stresses in Beams
Author: Shivkumar shivkusa@
Date: 2001-04-11 04:35:00

Dear Sir,
For all type of beam elements element table need to define to extract
required stress data. We can check output results available for perticular
element using cammand
"help elem#". e.g to define bending stress on + y side of beam element following

command can be used
etable,,s,byt
then we can see or list as follows,
general postprocesser-> element table--> plot/list element table

Regards,
Shiv

Ashu Sabnis wrote:

> Dear users

> I want to plot bending stresses in beams. But I am facing few problems.
> Please help me to sort out these problems.

> for BEAM3/4, by LS option I can plot bending stresses. But the plot is
> showing me zero stresses. Why? I have taken a simple cantilever beam. Please
> let me know my mistake.

> Also, this option is NOT available for BEAM 188/189 elements. So how can I
> plot bending stresses for these beams?

> Thanx in advance

> Ashu
> Professor
> VIT

Posts possibly associated with message #22618AuthorDateScore
22613Bending Stresses in BeamsAshu Sabnis2001/04/11 
22616Re: Bending Stresses in BeamsPollmanns, Josef josef.pollmanns@2001/04/11 
22618Re: Bending Stresses in BeamsShivkumar shivkusa@2001/04/11 
22620Re: [Re: Bending Stresses in Beams]Ashu Sabnis2001/04/11 
22621Re: [Re: Bending Stresses in Beams]Thomas Kipf2001/04/11 
22622Re: [Re: Bending Stresses in Beams]Shivkumar shivkusa@2001/04/11 
22623Bending stresses in beamsG.S. Krishnamurthy2001/04/11 
22625Re: [Re: [Re: Bending Stresses in Beams]]Ashu Sabnis2001/04/11 
22630Re: [Re: [Re: Bending Stresses in Beams]]Grama Bhashyam2001/04/11