XANSYS Message: 22615 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: Strange difference between ANSYS57 and ANSYS56
Author: Bin Zhao
Date: 2001-04-11 03:58:00

Dan,

Thank you for your answer.

Unfortunately, we used only the command file to creat the model.
So it is applied to run ANSYS56 and ANSYS57 seperately.
In this case, there is no link between ANSYS56 and ANSYS57.

Do you have any other hint ?

Bin

> De : Dan Bohlen[SMTP:dan.bohlen@a...]
> Répondre à : xansys
> Date : mardi 10 avril 2001 17:20
> A : xansys
> Objet : Re: [xansys] Strange difference between ANSYS57 and ANSYS56

> Did you just resume the 5.6 .db in 5.7? This works 99.9% of the time,
> but has been known to fail. The most reliable way is to CDWRITE your
> 5.6 .db and CDREAD it into 5.7.

> Dan

> > We modelled a quite complicated floor structure for high temperature
> > analysis. With ANSYS56 it worked very well. However when i use
> > ANSYS57 to redo the calculation. The simulation diverges already at room
> > temperature starting with some message saying that some small pivot
> values

> Dan Bohlen Phone: (513) 243-4645 / Dial Comm [8*332-4645]
> Stress Analyst Email: dan.bohlen@a... M/D K-105
> GE Aircraft Engines Fax: (513) 243-4888 or 243-4886

Posts possibly associated with message #22615AuthorDateScore
22552Strange difference between ANSYS57 and ANSYS56Bin Zhao2001/04/09 
22582Re: Strange difference between ANSYS57 and ANSYS56Dan Bohlen2001/04/10 
22585Re: Strange difference between ANSYS57 and ANSYS56John Crawford2001/04/10 
22589Re: Strange difference between ANSYS57 and ANSYS56Dan Bohlen2001/04/10 
22615Re: Strange difference between ANSYS57 and ANSYS56Bin Zhao2001/04/11