XANSYS Message: 20687 [Go back to message list]
[bookmark on del.icio.us]
No rating yet
Rate item:

Subject: Re: Modeling Rubber Material
Author: Steve Groothuis
Date: 2001-01-31 10:59:00

I might point out that there is an "updated" version of that paper at:

http://www.marc.com/Support/Library/MARC_FEA_ELASTOMERS_2000.pdf

Best Regards,
Steve Groothuis
Micron Technology, Inc.
-----Original Message-----
Sent: Wednesday, January 31, 2001 9:11 AM
To: xansys

Ashu:

There's a very good paper on-line at:

http://www.marc.com/Support/Library/MARC_FEA_ELASTOMERS_5_23_96.pdf

Also, see http://www.datapointlabs.com for more information on
experimentation.

Regards,

Dave

Dave Lindeman 3M Center 235-1F-36 Tel: 651-733-6383
Senior CAE Specialist St. Paul, MN 55144 Fax: 651-736-7615

----- Original Message -----
To: xansys xansys
Sent: Wednesday, January 31, 2001 4:34 AM

> Hello users

> I need some information regarding rubber material testing. To calculate
> Moony-revlin constants, some test data is required. I wanted to know
what
> type of tests are required? What are the specification? What should be the
> specimen? Which test data (like tensile, shear etc.) is required?

> Also kindly let me know where can these tests be done?

> Thanx in advance

> Ashu
> PG student

Posts possibly associated with message #20687AuthorDateScore
20669Modeling Rubber MaterialAshu Sabnis2001/01/31 
20683Re: Modeling Rubber MaterialDave Lindeman2001/01/31 
20687Re: Modeling Rubber MaterialSteve Groothuis2001/01/31 
20756Re: Modeling Rubber MaterialDmitriy Mikhaluk mikhaluk@2001/02/01