XANSYS Archives Listing

XANSYS Index
This is an index in reverse chronological order of each posting.
Note that replies to postings are indented with two whitespaces. The latest XANSYS postings can be found on the www.xansys.org website.

	Subject	Author	Date	Score
Search archives:
next 100 [latest message]		[first message] previous 100
`34548`	`Regarding substructuring`	`Somesh J. Ghunakikar`	`2002/03/05`
`34546`	`results output`	`Dan Bohlen`	`2002/03/05`
`34544`	`User Creep option`	`Narendra Singh`	`2002/03/04`
`34541`	`Guidance regarding choice of FEA package`	`AMIT K SHAH akshah@`	`2002/03/04`
`34539`	`general`	`Yunan P.`	`2002/03/05`
`34538`	`[EMAG] How to calculate the torque of rotated…`	`Bill Bulat`	`2002/03/04`
`34537`	`[LS-DYNA] EDCURVE - Unable to plot Load Curves`	`M. Shashikanth`	`2002/03/05`
`34536`	`flotran`	`vineet_indiain@`	`2002/03/05`
`34535`	`3D device quality contour plots to file?`	`Dan Bohlen`	`2002/03/04`
`34534`	`element shape warnings?`	`Samuel Kidane`	`2002/03/04`
`34533`	`yahoogroups down for a bit....`	`Dan Bohlen`	`2002/03/04`
`34532`	`subroutine linking problem`	`Pietro Testoni`	`2002/03/05`
`34530`	`Ansys Inc. 2002 Conference`	`Dan Bohlen`	`2002/03/05`
`34528`	`3D device quality contour plots to file?`	`Bram Weisman`	`2002/03/04`
`34527`	`Benchmark #4 is ready, test LS/DYNA on your machi…`	`Carlos Shultz`	`2002/03/04`
`34526`	`[FLOTRAN] ALE formulation problem`	`jkjung12 jkjung@`	`2002/03/04`
`34524`	`3D device quality contour plots to file?`	`Tom Jones`	`2002/03/04`
`34523`	`Guidance regarding choice of FEA package`	`AMIT K SHAH akshah@`	`2002/03/04`
`34522`	`3D device quality contour plots to file?`	`Uffe Dal Eriksen`	`2002/03/04`
`34521`	`Guidance regarding choice of FEA package`	`Marco Perucchi`	`2002/03/04`
`34520`	`Guidance regarding choice of FEA package`	`AMIT K SHAH akshah@`	`2002/03/04`
`34519`	`element shape warnings?`	`Riccardo Testi`	`2002/03/04`
`34518`	`Modelling and meshing questions for microdevices`	`sti_sti2000 sis@`	`2002/03/04`
`34517`	`Guidance regarding choice of FEA package`	`Ravi Kumar`	`2002/03/04`
`34516`	`STRUCT mesh of hemisphere`	`Kim Ravn-Jensen`	`2002/03/04`
`34514`	`element shape warnings?`	`Samuel Kidane`	`2002/03/03`
`34513`	`Guidance regarding choice of FEA package`	`Sunil Koranne`	`2002/03/03`
`34512`	`How to reset the commulative effet using LSSOLVE`	`Navtej Singh`	`2002/03/03`
`34511`	`[EMAG] How to calculate the torque of rotated…`	`wuab jds02@`	`2004/03/03`
`34510`	`subroutine linking problem`	`X.G. Hua`	`2002/03/03`
`34509`	`Combining Axisymmetric and 3-D solid Elements`	`Sung-Chul Lee`	`2002/03/03`
`34508`	`How to reset the commulative effet using LSSOLVE`	`Martin Vezina`	`2002/03/03`
`34507`	`subroutine linking problem`	`Nagendra Singh`	`2002/03/03`
`34506`	`Guidance regarding choice of FEA package`	`Ravi Kumar`	`2002/03/03`
`34505`	`How to reset the commulative effet using LSSOLVE`	`Dave Johnson`	`2002/03/03`
`34504`	`How to reset the commulative effet using LSSOLVE`	`Navtej Singh`	`2002/03/03`
`34503`	`subroutine linking problem`	`Dave Johnson`	`2002/03/03`
`34502`	`subroutine linking problem`	`John Swanson`	`2002/03/03`
`34500`	`How to reset the commulative effet using LSSOLVE`	`Steve Groothuis`	`2002/03/02`
`34499`	`How to reset the commulative effet using LSSOLVE`	`Navtej Singh`	`2002/03/02`
`34498`	`subroutine linking problem`	`Nagendra Singh`	`2002/03/02`
`34497`	`subroutine linking problem`	`John Swanson`	`2002/03/02`
`34496`	`subroutine linking problem`	`Nagendra Singh`	`2002/03/02`
`34495`	`[EMAG] How to calculate the torque of rotated…`	`Bill Bulat`	`2002/03/02`
`34494`	`Ansys beginner quesition`	`Tiezhi Zhang`	`2002/03/02`
`34493`	`STRUC- Path Operation Values`	`Dave Johnson`	`2002/03/02`
`34492`	`Abort of batch job`	`Thomas Kipf`	`2002/03/02`
`34491`	`[EMAG] How to calculate the torque of rotated arm…`	`wuab jds02@`	`2004/03/01`
`34490`	`subroutine linking problem`	`John Swanson`	`2002/03/01`
`34489`	`subroutine linking problem`	`Nagendra Singh`	`2002/03/01`
`34488`	`STRUC- Path Operation Values`	`Mark Tate`	`2002/03/01`
`34487`	`STRUC- Path Operation Values`	`Lecuyer Dick dick.lecuye…`	`2002/03/01`
`34486`	`Process Status Window`	`Ron Morris ron.morris@`	`2002/03/01`
`34485`	`Process Status Window`	`Sheldon Imaoka`	`2002/03/01`
`34484`	`beam 189 section tension in an array`	`Alejandro Madrid amadrid@`	`2002/03/01`
`34483`	`Process Status Window`	`Ron Morris ron.morris@`	`2002/03/01`
`34482`	`History of ANSYS`	`Shen-Yeh Chen`	`2002/03/01`
`34481`	`STRUCT mesh of hemisphere`	`Garrett Blake 98057022@`	`2002/03/01`
`34480`	`Regarding CDW and CDR`	`Navaneeth Bashyam`	`2002/03/01`
`34479`	`THER- Material Props`	`Edmund Singer`	`2002/03/01`
`34478`	`THER- Material Props`	`Rajesh Krithivasan rkrit…`	`2002/03/01`
`34477`	`THER- Material Props`	`Osman Buyukisik`	`2002/03/01`
`34476`	`ANSYS_LOCK in config file`	`Christian Semler`	`2002/03/01`
`34475`	`THER- Material Props`	`Rajesh Krithivasan rkrit…`	`2002/03/01`
`34474`	`THER- Material Props`	`Mark Krueger`	`2002/03/01`
`34473`	`ANSYS_LOCK in config file`	`Jacob Bjorstrom`	`2002/03/01`
`34472`	`THER- Material Props`	`Rajesh Krithivasan rkrit…`	`2002/03/01`
`34471`	`results output`	`Edmund Singer`	`2002/03/01`
`34470`	`xansys: contact wizard`	`Katherine Bryce`	`2002/03/01`
`34469`	`xansys: contact wizard`	`Katherine Bryce`	`2002/03/01`
`34468`	`GENERAL : /Config for RST file setting`	`M. Shashikanth`	`2002/03/01`
`34467`	`regarding geometry`	`Marco Perucchi`	`2002/03/01`
`34466`	`tangential & normal loads and pressures`	`Chalam simhachalamb@`	`2002/02/28`
`34465`	`regarding geometry`	`Sachin Thakkar`	`2002/02/28`
`34464`	`tangential & normal loads and pressures`	`Soujanya Marisarla`	`2002/02/28`
`34463`	`Element stiffness depends on Solver and BCs used?…`	`Manish Sharma`	`2002/02/28`	`10`
`34462`	`ANSYS 6.0 launcher`	`Mark Krueger`	`2002/02/28`
`34461`	`xansys: contact wizard`	`James Kosloski`	`2002/02/28`
`34460`	`Regarding CDW and CDR`	`Tom Davis`	`2002/02/28`
`34459`	`xansys: contact wizard`	`Don Shaffer`	`2002/02/28`
`34458`	`FEA and CAD Sytems in General`	`Jan Christian Anker`	`2002/02/28`
`34457`	`Modelling and meshing questions for microdevices`	`Bill Bulat`	`2002/02/28`
`34456`	`Regarding CDW and CDR`	`John Ceko`	`2002/02/28`
`34455`	`ANSYS 6.0 launcher`	`Neil Hodge`	`2002/02/28`
`34454`	`Regarding CDW and CDR`	`srinathk srinathk@`	`2002/02/28`
`34453`	`Regarding CDW and CDR`	`Mark Tate`	`2002/02/28`
`34452`	`Regarding CDW and CDR`	`srinathk srinathk@`	`2002/02/28`
`34451`	`new error in ansys 6.0`	`Somesh J. Ghunakikar`	`2002/02/28`
`34450`	`Parameters in output window of ANSYS 6.0`	`Eric Miller`	`2002/02/28`
`34449`	`Parameters in output window of ANSYS 6.0`	`Tim Mannix`	`2002/02/28`
`34448`	`Regarding CDW and CDR`	`Tom Davis`	`2002/02/28`
`34447`	`Regarding CDW and CDR`	`srinathk srinathk@`	`2002/02/28`
`34446`	`Question On Thermal Film Coefficients In Rota…`	`Mark Troscinski`	`2002/02/28`
`34445`	`Ansys/LS-Dyna`	`cae_tools prabhakar@`	`2002/02/28`
`34444`	`Tsai wu failure criteria in combination with …`	`Karen Loiselet`	`2002/02/28`
`34443`	`Question On Thermal Film Coefficients In Rota…`	`Tom Davis`	`2002/02/28`
`34442`	`Tsai wu failure criteria in combination with isot…`	`Martin Eriksson martin.e…`	`2002/02/28`	`0`
`34441`	`[hardware] - time for new machine or upgrade`	`Bryan Baskin`	`2002/02/28`
`34440`	`element face nos.`	`Roberto Porto`	`2002/02/28`
`34439`	`Regarding displacement values`	`Riccardo Testi`	`2002/02/28`
next 100 [latest message]		[first message] previous 100

How to perform searches:
You can search for multiple words using the following syntax:

Use of term will search for term. However, if you search for term1 term2, then the search results will include either term1 or term2.
Enter +term to signify that search results must contain term. If you search for +term1 +term2, then the search results will only include results with both term1 and term2. On the other hand, if you search for +term1 term2, then the search results will include results with only term1 but with results containing term2 being listed first.
Enter -term to omit results containing term. For example, if you search for +term1 -term2, then only results containing term1 but not term2 will be displayed.
Enter "term1 term2" to search for the exact phrase term1 term2.
Wildcards can be used. Enter "term*" to search for any word beginning with term, such as term1 and term2. Search words must be more than three characters long (i.e., you cannot search for "CP").)

About this archive:
The XANSYS mailing list is a forum for discussing topics related to ANSYS.
XANSYS archive database server courtesy of Martin Liddle (Tynemouth Computer Services).
Site created and maintained by Sheldon Imaoka (ansys.net), email: mail-ansys [at] ansys [dot] net.